Using OxiClean Stain Remover is pretty straightforward! Here's a basic guide:
-
Prepare the Solution: Fill a bucket, sink, or similar container with warm water. The exact amount of water will depend on the stain you're treating and the instructions on the packaging. Generally, you'll need about 1 scoop of OxiClean per gallon of water.
-
Add OxiClean: Using the provided scoop, measure out the appropriate amount of OxiClean powder and add it to the water. Stir the mixture until the powder is fully dissolved.
-
Soak or Apply: Depending on the type of stain and the item being treated, you can either soak the stained item in the OxiClean solution or apply the solution directly to the stain. For soaking, make sure the item is fully submerged and let it sit for the recommended amount of time. For direct application, ensure the stain is saturated with the solution.
-
Scrub if Necessary: For tougher stains, you may need to gently scrub the stained area with a brush or sponge to help loosen the stain. Be careful not to damage delicate fabrics or surfaces.
-
Rinse: After the stain has been treated, thoroughly rinse the item with clean water to remove any remaining OxiClean solution.
-
Check for Stain Removal: Once rinsed, check to see if the stain has been completely removed. If not, you may need to repeat the process or try alternative stain removal methods.
-
Wash as Usual: After the stain has been successfully treated, you can wash the item as you normally would, following the care instructions on the garment or item.
Remember to always read and follow the instructions on the OxiClean packaging for the best results, as specific recommendations may vary depending on the type of stain and fabric.